Soft wall panels. Fabrication and installation

Wide choice of finishing materials offered in the construction market, allows you to go beyond the traditional wallpaper or painting, frightening in their monotony. If you have decided with what effect plan to achieve at the end of the repair, the choice of finishing materials will not cause difficulties, but on the contrary, will be fascinating design exercise. For those who decided to create a refined and unique interior, designed in eurostyle, the ideal solution would be soft wall panels, recognized quite rare kind of decor.

Soft wall panels: a promising option of finishing or relic of the past?

Despite the fact that the soft decorative wall panels have become widespread only in the past decade, the idea of ​​applying the fabric for decorative wall finishing is not new. Design History is replete with credible evidence on the use of fabric wallpaper and other soft decoration materials, and many of our contemporaries have time to even catch the moment when the wall hangings were unforgettable attribute the vast majority of urban apartments and country houses.

Modern alternative to such a variety of soft steel wall panels, a photo which you can see in this article. Designers believe that with their help even the most ordinary interior can be changed, making it bright and attractive.

Advantages of the soft wall decorative panels

An important advantage of the soft wall panels is their ability to improve sound insulation space, which contributes to their more frequent use in rooms with low levels of noise and heat insulation, as well as in areas where they like to sing karaoke. But it is not only the dignity of the original fabric. Consider the many advantages inherent in soft wall panels:

  • The panels can be original material, not only for the walls but the ceiling, and even the podium and give the room a welcome personality;
  • Soft panel suitable for registration as an entire wall, and its separate fragments. They will not only be an excellent option for zoning premises, but also help to arrange the necessary accents;
  • Installation of the soft wall panels does not require careful advance preparation;
  • Soft wall panels made of artificial leather and leather do not require additional care and, in the case of additions minor accessories such as brass tacks, may be part of a refined interior decoration.
  • The use of soft panels - a unique opportunity to hide the defects of the walls without time-consuming finishing.

Materials for making soft wall panels

The most optimal materials used for the manufacture of soft wall panels are:

Genuine Leather

Panels made of leather, are considered the most luxurious and expensive variant finishes, ideally combined not only with monophonic wallpaper but also color prints, as well as wood and leather furniture.

imitation leather

Despite the significantly lower cost of synthetic leather panels look quite impressive and at the same time are easy to clean. Compared with wallpaper, leatherette panel repel dirt and dust particles, and also can be subject to wet cleaning. In this connection, they are suitable for interior design less expensive, the purpose of which is to hide the defects of existing base surface of the walls, and communications wires from the lighting.


The optimal material for soft wall panels with their own hands, of course, is the fabric. However, by choosing to form a soft textile finishing panels must be approached with due diligence and select the most hard-wearing and durable material, which does not droop not stretch over time and be able to withstand all the loads imposed on it.

The choice of a filler for soft wall panels

To produce high-quality wall panels, enough to choose the material for upholstery. Filler - an important component, which also depends on the quality of manufactured panels.

foam rubber

Suitable for the manufacture of thick wall panels, trim which will form a soft wall. It is considered the most suitable option to create soft wall panels for children.


Using sintepon, you get to create a uniform surface. Since syntepon weight lower than that of foam rubber, it eliminates the possibility of premature deformation and sagging.

.yap-title-block__text, .yap-title {
font-size: 17px important;!
# Yap-Ya_sync_2-vertical .yap-title-block__text {
font-size: 17px important;!

How to make a soft wall panels yourself?

Before answering the question: "How to make a soft wall panel", adding that it can be carried out in two ways. The most common method is considered Karetnaya ties, the most popular and well-known since ancient times.

  • The basis of the finishing structure made by Karetnaya screed rests plywood or particle board sheet, in which bore holes in those places where the material sheathing will be pressed buttons or ornamental nails. hole pattern - arbitrary and depends only on your imagination, but is considered to be the most common chess order.
  • Next, cut and fix a substrate or filler. It should have the same dimensions as the solid foundation. Secure the substrate on the plywood by using the adhesive.

  • Upholstery fabric are cut and taking into account the margins of the substrate thickness, and also given the fact that the fabric will need to bend to the rear side of the panel. The material was then fixed on the rear side of the plywood by staple gun with one or two sides, after which the remaining sides.
  • Next proceed to the installation of decorative buttons, which is used to hold the nylon yarn having increased strength, resistance to stretching and rot, which contributes to a significant increase in its operational lifetime.

  • The filament is fixed in a holder buttons, then pulled through the upholstery material and a filler, and finally through the bore in plywood or chipboard. At the rear of nylon filament is fixed via staple gun. Experts advise to carry out such an attachment by two oppositely directed brackets, which significantly increases its reliability.

How to fix the decorative panels?

Fixing soft panels, as well as their preparation does not require the acquisition of additional skills. The main point that needs to be taken into account when placing the panels and their subsequent consolidation - careful marking the surface, which will help to avoid horizontal or vertical distortions panels.

Fastening wall panels can be carried out in several ways, the most important of which are:

Gluing soft panels on the wall

  • Before you begin gluing soft panels, plaster and its soil, which helps to improve the adhesion of the material to the wall surface;
  • Having defined the spatial arrangement of the panels on the wall make the appropriate notations in pencil;
  • PVA glue is applied in a zigzag manner on the back side panels and press them tightly applied according to the markings. The panels can be made in any direction: from top to bottom, right to left, etc. In that case, if the panel reaches the ceiling, experts advise to mount such panels from top to bottom;
  • The side panels are cut with a hacksaw to until they reach the required size. For this series are detached part of the material part sawn solids basis, having stuck place with adhesive tape and cutting wrapping material on the backside.
  • Since the cut panels are characterized by less aesthetic appearance, they can be arranged so that the panel does not reach the angle that avoids trimming panels. However, it is important to bear in mind that a distance from the panel to the wall of coal from all sides must be the same.

cording frame, pre-mounted on the wall

  • Preparing wooden slats appropriate dimensions and angles, bonded frame via screws;

  • On the front side of the perimeter frame nailed plywood sheets, after which the resulting paste sintepon frame;

  • Panel tightly adhesive qualities cloth, do not forget about the allowances that are fixed with a staple gun to the back of the frame;

  • Obtyanuv stud material, they nailed to the sheathing. To prevent damage to the material on the studs, enclose sintepon on which hammer a nail.

Fastening panels by dowels occurs much less frequently, as this method proved itself only in the case of soft wall panels for the bedroom, the substrate thickness is greater than 3 cm.

Like this post? Please share to your friends: